ASTM E3022-18對紫外線探傷燈有哪些要求？

簡單地說，ASTM E3022-18是一個概述UV-a LED紫外線探傷燈性能測試程序的標準。ASTM E3022-18列出了報告要求，這些要求被認為是證明此類探傷燈適用于熒光滲透劑和熒光磁粉檢測的必要條件。

實際上，這意味著ASTM E3022-18 LED探傷燈具應提供合格證書，說明該LED探傷燈具已進行測試，并與所進行的測試結果一致。

尋找ASTM-E3022認證的紫外線探傷燈？點擊此處閱讀LUYOR-3103LED探傷燈

ASTM E3022-15，E3022-18的前身于2015年9月1日發布，是由美國空軍成員主持的紫外線探傷燈制造商和行業專家的集體工作。

五年后，該標準已發展成為熒光滲透劑和熒光磁粉檢測中使用的UV-a LED探傷燈的全球標準和基準。如空中客車公司，已納入ASTM E3022-18，并將其作為其內部測試方法的基本要求（即空中客車公司AITM6-001–第12期）。尋求NADCAP認證的受審核方的NADCAP審核標準清單（AC711/1）也包含了與ASTM E3022-18類似的要求。

WHAT DOES ASTM E3022-18 MEAN FOR UV INSPECTION LAMPS?

In the simplest terms ASTM E3022-18 is a standard which outlines the procedures for testing the performance of UV-A LED lights. ASTM E3022-18 lists all reporting requirements that are considered essential to prove such lights are suitable to be used for fluorescent penetrant and fluorescent magnetic particle inspections.

Practically this means ASTM E3022-18 lights are supplied with a certificate of conformity stating that the light has been tested and found to be in compliance along with the results of the tests undertaken.

Looking for an ASTM-E3022 certified UV lamp? Click here to read about the XEPU-1605 365nm uv Inspection Lamp

ASTM E3022-15, the predecessor of E3022-18 was released on September 1st, 2015 and was the collective work UV light manufacturers and industry experts chaired by a member of the US Airforce.

Five years later, this standard has developed into a global standard and a benchmark for UV-A LED lights used in fluorescent penetrant and fluorescent magnetic particle inspections. Some primes, such as Airbus, have incorporated ASTM E3022-18 and used it as the cornerstone of their own internal testing method (i.e. Airbus AITM6- 1001 – issue 12). NADCAP Audit criteria checklists (AC711/1) for auditees seeking NADCAP accreditation also incorporate similar requirements as ASTM E3022-18.